Configuring a VPLS Service with CLI
Page 372 7750 SR OS Services Guide
config>service>pe-discovery-policy name
password
Configures the PE discovery password that is used when contacting the
RADIUS server for VPLS auto-discovery.
556
polling-interval
Configures the PE discovery polling interval. 556
server
Identifies a specific RADIUS server. 557
timeout
Configures the time to wait before timing out a RADIUS server. 557
Applying a PE discovery policy to VPLS
config>service>vpls>radius-discovery
radius-discovery
Enables the RADIUS provider edge discovery for this VPLS service. 558
pe-discovery-policy
Specifies the existing RADIUS PE discovery policy name. 558
user-name-format
Specifies whether the RADIUS user name is a VPN ID or router-
distinguisher.
558
Table 1: CLI Commands to Configure VPLS Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
