Virtual Private Routed Network Services
7750 SR OS Services Guide Page 887
secondary
Assigns a secondary IP address, IP subnet, and broadcast address
format to an IP interface.
983
static-arp
Configures a static address resolution protocol (ARP) entry associating
a subscriber IP address with a MAC address for the router instance.
984
no shutdown
Enables the VPRN interface. 951
Configure VPRN interface SAP parameters 917
config>service>vprn>interface>sap
accounting-policy
Specifies the accounting policy to apply to the SAP. 1004
anti-spoof
Enables anti-spoof filtering and optionally changes the anti-spoof
matching type for the interface.
1009
collect-stats
Enables the collection of accounting and statistical data for the SAP or
network port
1004
description
Creates a text description stored in the configuration file for the SAP. 952
ingress
Enables a context to configure ingress SAP Quality of Service (QoS)
policies and filter policies.
1006
multi-service-site
Creates a new customer site or edits an existing customer site with the
customer-site-name parameter.
1022
tod-suite
Applies a time-based policy (filter or QoS policy) to the SAP. 1003
Configure SAP egress parameters
config>service>vprn>if>sap>egress
filter
Associates an IP filter policy or MAC filter policy with an egress SAP
or IP interface.
1016
qos
Associates a Quality of Service (QoS) policy with an egress SAP or IP
interface.
1020
queue-override
Enables the context to configure override values for the specified SAP
egress QoS queue.
1023
queue
Specifies the ID of the queue whose parameters are to be overridden. 1023
adaptation-rule
Specifies attributes of the specified queue’s adaptation rule parameters. 1023
cbs
Specifies attributes of the specified queue’s CBS parameters. 1026
high-prio-only
Specifies attributes of the specified queue’s high-prio-only parameters. 1026
mbs
Specifies attributes of the specified queue’s MBS parameters. 1027
rate
Specifies attributes of the queue’s Peak Information Rate (PIR) and the
Committed Information Rate (CIR) parameters.
1028
scheduler-override
Specifies the set of attributes whose values have been overridden via
management on this virtual scheduler.
1029
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
