Configuring a VPRN Service with CLI
Page 896 7750 SR OS Services Guide
Configure VPRN RIP group parameters 912
config>service>vprn>rip>group
authentication-key
Sets the authentication password to be passed between RIP neighbors. 1101
authentication-type
Defines the type of authentication to be used between RIP neighbors. 1102
check-zero
Enables checking for zero values in fields specified to be zero by the
RIPv1 and RIPv2 specifications.
1102
description
Creates a text description stored in the configuration file for the RIP
instance.
952
export
Specifies the export policies to be used to control routes advertised to
RIP neighbors.
1103
import
Specifies the import policies to be used to control routes advertised
from RIP neighbors.
1103
message-size
Sets the maximum number of routes per RIP update message. 1104
metric-in
Sets the metric added to routes that were received from a RIP neighbor. 1104
metric-out
Sets the metric added to routes that were exported into RIP and
advertised to RIP neighbors.
1104
preference
Sets the route preference assigned to RIP routes. 1105
receive
Configures the type(s) of RIP updates that will be accepted and
processed.
1105
send
Specifies the type of RIP messages sent to RIP neighbors. 1106
split-horizon
Enables the use of split-horizon. 1102
timers
Sets the values for the update, timeout, and flush timers. 1106
Configure VPRN RIP neighbor parameters
config>service>vprn>rip>group>neighbor
authentication-key
Sets the authentication password to be passed between RIP neighbors. 1101
authentication-type
Defines the type of authentication to be used between RIP neighbors. 1102
check-zero
Enables checking for zero values in fields specified to be zero by the
RIPv1 and RIPv2 specifications.
1102
description
Creates a text description stored in the configuration file for the RIP
instance.
952
export
Specifies the export policies to be used to control routes advertised to
RIP neighbors.
1103
import
Specifies the import policies to be used to control routes advertised
from RIP neighbors.
1103
message-size
Sets the maximum number of routes per RIP update message. 1104
metric-in
Sets the metric added to routes that were received from a RIP neighbor. 1104
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
