Special Features
Service Door and Coin Vault
Openings
The control will capture the times and dates
of
the
openings
of
the Coin Vault and the Service Door. The
infonnation is saved
in
memory. An open service door
combined with various keypad presses allows the
control to enter manual modes
of
operation
if
the
Break-In Alann is not on. These modes include Manual
Programming, Audit Collection and Diagnostics.
Break-In Alarm
This feature allows the owner to program the machine
to signal a network alann, cause a machine alann
or
shut down the machine
if
the service door
or
coin vault
is opened without disabling the
alann
first. The date
and time
of
the break-in is recorded. To avoid the
alann
during coin collections, the
alann
must
be
turned
off
or temporarily disabled
by
pressing the two
programmed keys.
The alann is turned
off
by
default.
The
alann
can be
turned on
by
programming the control with an external
device or network.
Special Vend
This feature allows the owner to program the control
to allow programmable vend prices for specific hours
and dates.
For details on programming Special Vend, refer to
Programming Control.
OPL Mode
This feature allows the user to start a cycle without
satisfying the vend price.
For
details on enabling OPL Mode, refer to
Programming Control.
Drop-Off Mode
This feature allows the owner
to
limit machine use
to
an attendant without requiring vend. Starting the
machine will require the correct sequence
of
four
keypad presses as programmed
by
an external device,
card reader or network.
For details on enabling Drop-Off Mode, refer to
Programming Control.
Low Power/Auto-Shutdown Option
This feature allows the owner to program the control
to shut down or enter a low power consumption mode
based
on
programmable times and dates
if
either
of
these options are enabled.
For
details on programming the
Low
PowerIAuto-
Shutdown option, refer
to
Programming Control.
802952
© Published
by
permission
of
the copyright owner -
DO
NOT
COPY
or
TRANSMIT
11
To Next Page
Loading...
