4.
Start Pulse Value
"PLSE"
This option allows the owner to program the value
of
the Start Pulse
ifused
for multiple pulses with an after-
market central card reader or pay system. Refer to
option 5 for additional information.
How to Program Start Pulse Value
1.
Control must be in Manual Mode. Refer to
Entering the
Manual
Mode.
2. Press the DELICATESIBULKY (/\) or the
COLD
(v)
keypad until "Prog" appears in the
display. Press the START (enter) keypad and
"AtS1" will appear in the display.
3. Press the DELICATESIBULKY (/\)
or
the
COLD
(v)
keypad to scroll through the
programmable options until
"PLSE" appears in
the
display_
4. When "PLSE" appears in the display, press the
START (enter) keypad. There are five digits in
the Start Pulse Value. The fifth digit will appear
in the display and will flash one second on and
one second off. Refer to
Figure
6.
NOTE:
If
the Start Pulse Value is $100.00
or
more,
the fifth digit is "1-6".
If
the
Start
Pulse Value is
$99.99
or
less, the fifth digit is
"0".
CHM507R
Figure 6
5. Press the DELICATESIBULKY (/\) or the
COLD
(v)
keypad to increase
or
decrease the
value
of
the fifth digit.
NOTE: The Start Pulse Value can be set from 1 to
65,535. The factory default setting is 25.
Programming Control
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE:
To
go
back to the current programmable
option without changing the value, press the
WARM
«)
keypad.
7. Press the DELICATESIBULKY (/\) or the
COLD
(v)
keypad to increase or decrease the
value
of
the active digit and the START (enter)
keypad to enter the value
of
the digit and advance
to the next digit.
8. Press the START (enter) keypad with the last
active digit. The next option,
"PLSn", will
appear in the display.
NOTE:
To
program
"PLSn"
(Start Pulse Mode),
refer to
option
5.
To
program other options, refer to
the appropriate section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
802952
@ Published
by
permission
of
the copyright owner - DO NOT
COPY
or
TRANSMIT
27
To Next Page
Loading...
