Allwinner A20 - Page 490

A20 User Manual (Revision 1.2) Copyright © 2013 Allwinner Technology Co., Ltd. All Rights Reserved. Page 490 / 812
Bit
Read/
Write
Default/
Hex
Description
31:0
R/W
0x0
LINE_STRIDE
In tile-based type
The stride length is the distance from the start of the end line in
one tile to the start of the first line in next tile(here next tile is in
vertical direction)
In non-tile-based type
The stride length is the distance from the start of one line to the
start of the next line.
5.3.4.14. DEFE_LINESTRD1_REG
Offset: 0x44
Register Name: DEFE_LINESTRD1_REG
Bit
Read/
Write
Default/
Hex
Description
31:0
R/W
0x0
LINE_STRIDE
In tile-based type
The stride length is the distance from the start of the end line in
one tile to the start of the first line in next tile(here next tile is in
vertical direction)
In non-tile-based type
The stride length is the distance from the start of one line to the
start of the next line.
5.3.4.15. DEFE_LINESTRD2_REG
Offset: 0x48
Register Name: DEFE_LINESTRD2_REG
Bit
Read/
Write
Default/H
ex
Description
31:0
R/W
0x0
LINE_STRIDE
In tile-based type
The stride length is the distance from the start of the end line in
one tile to the start of the first line in next tile(here next tile is in
vertical direction)