6.4.12.3.4 Replacing the gear wheel in the leading wheel drive
If the high spread rate is not reached when seeding
rapeseed or soya, replace gear wheel Z=15 with gear
wheel Z=30.
1. To relieve the drive chain,
release the tension spring
from the retaining
pin
.
CMS-I-00002649
2. Remove the bolts
.
3. Push the cover
to the side.
4. Swivel up the cover.
CMS-I-00002646
5. Loosen the bolt
.
6. If the parking position can be tipped far enough,
take the chain extension
from the parking
position.
CMS-I-00005656
CMS-T-00003647-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
112