4. Remove the bolts
.
5. Remove the coulter bracket
.
CMS-I-00004135
Removing the coulters with a crane is described in
the following.
6. To make the coulter tip slightly towards the
front for removal,
select a longer front load handling device at the
front than at the rear.
7. Fasten the load handling device on the coulter top
link
.
8. Fasten 2 load handling devices on the coulter
body
.
CMS-I-00004137
9. Lift the coulter
.
10. Release the tilted coulter from the frame
.
CMS-I-00004136
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
154
To Next Page
Loading...
