Errors Cause Solution
Speed fluctuations on the hydraulic
drive.
Speed fluctuations occur on the
hydraulic drive.
Contact your specialist
workshop.
The fill level in the singling unit
housing is too high.
The brushes of the filling block are
worn.
see page 232
The seed furrow is unstable or
does not maintain its shape.
The furrow former is worn. To replace the furrow former,
see "Changing the furrow
former".
9 | Repairing the machine
Eliminating faults
MG6660-EN-II | D.1 | 27.09.2021
227
To Next Page
Loading...
