9.4.2 Gaps can be caused by insufficient seed in the grain singling unit.
Bridge formation disturbs the seed flow in the grain singling unit.
NOTE
Talc in the seed shortens the cleaning interval of
the opto-sensor.
Do not use graphite. Graphite disturbs the
function of the opto-sensor.
To improve the of seed,
adjust the sliding shutter.
or
If the grain shape and dressing cause the
formation of bridges, improve the sliding
capacity of the seed by
adding 1.6 g of talc per 1 kg of seed.
9.4.3 The seed is not caught and jumps out of the furrow.
The seed collides against the catch roller or against the seed furrow.
NOTE
If the seed collides against the catch roller
or
the seed furrow
, it is not reliably caught. The
position of the catch roller can be adjusted.
The position of the catch roller must be adjusted
by trained specialist personnel.
Contact your specialist workshop.
CMS-I-00001925
CMS-T-00002346-A.1
CMS-T-00002347-C.1
9 | Repairing the machine
Eliminating faults
MG6660-EN-II | D.1 | 27.09.2021
229
To Next Page
Loading...
