9.4.6 Blocking the depth control wheels.
Soil gets stuck between the cutting discs and the depth control wheels with closed rim.
Remove the depth control wheels
and clean
them
or
If the predominant operating conditions do
not allow for continuous operation of the
implement,
replace the depth control wheels with closed rim
with depth control wheels with open rim.
CMS-I-00005302
Organic residues get stuck on the open rims.
Clean the depth control wheels
or
If the predominant operating conditions do
not allow for continuous operation of the
implement,
replace the depth control wheels with open rim
with depth control wheels with closed rim.
9.4.7
Stopping of one or several singling discs.
The fuse for the electric drive is defective.
CMS-I-00002695
CMS-T-00007530-A.1
CMS-T-00003677-B.1
9 | Repairing the machine
Eliminating faults
MG6660-EN-II | D.1 | 27.09.2021
231