Amazone Precea 3000 - Page 92

6.4.7.4 Precea 6000
6.4.7.4.1 Unfolding the track markers
1. To unfold the track markers,
actuate the "yellow 1" tractor control unit.
2. Put the "yellow" tractor control unit in the neutral
position.
6.4.7.4.2 Adjusting the track marker for 5.20 m working width
1. Move the track marker mount
5
on the
implement section
7
to the desired position.
2. Install the bolts
6
.
3. Install the nuts
4
.
4. Release the clamp connection
2
.
5. To adjust the track marker length,
move the shaft
3
of the track marker disc
1
to
the desired position.
6. To adjust the pitch of the track marker disc,
turn the shaft of the track marker disc to the
desired position.
CMS-I-00003871
6.4.7.4.3 Adjust the track marker for 5.40 m working width.
1. Move the track marker mount
4
on the
implement section
7
to the desired position.
2. Install the bolts
6
.
3. Install the nuts
5
.
4. Release the clamp connection
2
.
5. To adjust the track marker length,
move the shaft
3
of the track marker disc
1
to
the desired position.
6. To adjust the pitch of the track marker disc,
turn the shaft of the track marker disc to the
desired position.
CMS-I-00003872
CMS-T-00005435-B.1
CMS-T-00005590-A.1
CMS-T-00005438-B.1
CMS-T-00005439-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
86