EasyManuals Logo

Applied Biosystems QuantStudio 6 Flex User Manual

Applied Biosystems QuantStudio 6 Flex
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #176 background imageLoading...
Page #176 background image
CAUTION! Cleaning and Decontamination. Use only the cleaning and
decontamination methods that are specied in the manufacturer user
documentation. It is the responsibility of the operator (or other responsible
person) to ensure that the following requirements are met:
·
No decontamination or cleaning agents are used that can react with parts of
the equipment or with material that is contained in the equipment. Use of
such agents could cause a HAZARD condition.
·
The instrument is properly decontaminated a) if hazardous material is
spilled onto or into the equipment, and/or b) before the instrument is
serviced at your facility or is sent for repair, maintenance, trade-in, disposal,
or termination of a loan. Request decontamination forms from customer
service.
·
Before using any cleaning or decontamination methods (except methods that
are recommended by the manufacturer), conrm with the manufacturer that
the proposed method will not damage the equipment.
MISE EN GARDE ! Neoyage et décontamination. Utiliser uniquement les
méthodes de neoy
age et de décontamination indiquées dans la documentation
du fabricant destinée aux utilisateurs. Lopérateur (ou toute autre personne
responsable) est tenu d’assurer le respect des exigences suivantes:
·
Ne pas utiliser d’agents de neoyage ou de décontamination susceptibles de
réagir avec certaines parties de l’appareil ou avec les matières qu’il contient
et de constituer, de ce fait, un DANGER.
·
L’instrument doit être correctement décontaminé a) si des substances
dangereuses sont renversées sur ou à l’intérieur de l’équipement, et/ou
b) avant de le faire réviser sur site ou de l’envoyer à des ns de réparation, de
maintenance, de revente, d’élimination ou à l’expiration d’une période de
prêt (des informations sur les formes de décontamination peuvent être
demandées auprès du Service clientèle).
·
Avant d’utiliser une méthode de neoyage ou de décontamination (autre que
celles recommandées par le fabricant), les utilisateurs doivent vérier auprès
de celui-ci qu’elle ne risque pas d’endommager l’appareil.
To minimize negative environmental impact from disposal of electronic waste, do not
dispose of electronic w
aste in unsorted municipal waste. Follow local municipal waste
ordinances for proper disposal provision and contact customer service for information
about responsible disposal options.
Laser safety—barcode scanner
The optional barcode scanners included with the QuantStudio
6 and 7 Flex Systems
are categorized as Class 2 (II) lasers.
Class 2 (II) lasers are low-power, visible-light lasers that can damage the eyes. Never
look directly into the laser beam. The scanner is designed to prevent human access to
harmful levels of laser light during normal operation, user maintenance, or during
prescribed service operations.
Cleaning and
decontamination
Instrument
c
omponent and
accessory
disposal
Appendix I Safety
Laser safety—barcode scanner
I
176
QuantStudio
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Applied Biosystems QuantStudio 6 Flex and is the answer not in the manual?

Applied Biosystems QuantStudio 6 Flex Specifications

General IconGeneral
BrandApplied Biosystems
ModelQuantStudio 6 Flex
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals