Instrument consumables
The QuantStudio
™
6 and 7 Flex Systems support a series of specialized consumables
through interchangeable sample blocks. Use the consumables appropriate for the
sample block of your QuantStudio
™
6 or 7 Flex Systems.
Note: The QuantStudio
™
6 Flex System does not support the Array Card block.
WARNING! Use the at caps for 0.2 mL tubes and 0.1 mL tubes. Rounded caps
can damage the heated cov
er.
Sample block Consumable
Reaction
v
olume
96-well plate, 0.2 mL
• MicroAmp
™
Optic
al 8-Cap Strip
• MicroAmp
™
8-Tube Strips (0.2‑mL)
• MicroAmp
™
Reaction Tubes without Caps
(0.2‑mL)
• MicroAmp
™
96-Well Tray/Retainer Set
100 µL
• MicroAmp
™
Optic
al Adhesive Film
• MicroAmp
™
Optical 96-Well Reaction Plate
with Bar Code
100 µL
96-well plate, 0.1 mL
• MicroAmp
™
Optic
al Adhesive Film
• MicroAmp
™
Optical 96-Well Fast Reaction
Plate with Bar Code
50 µL
384-well plate
• MicroAmp
™
Optic
al Adhesive Film
• MicroAmp
™
Optical 384-Well Reaction Plate
with Bar Code
20 µL
TaqMan
®
Arr
ay Card
[1]
TaqMan
®
Arr
ay Card 1 µL
[1]
Q
uantStudio
™
7 Flex System only.
Chapter 1 Getting s
tarted
Instrument consumables
1
24
QuantStudio
™
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide