EasyManua.ls Logo

Applied Biosystems QuantStudio 6 Flex - APPENDIX C Networking; Networking overview

Applied Biosystems QuantStudio 6 Flex
194 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Networking
Networking overview ................................................ 113
Network setup workow ............................................. 116
Collect the required network information ............................... 116
Connect the QuantStudio
6 or 7 Flex System to the network ............. 117
Connect the computer to the network .................................. 118
Monitor the QuantStudio
6 or 7 Flex Real-Time PCR System ............. 119
IMPORTANT! This chapter does not provide adequate detail to integrate the
QuantStudio
6 or 7 Flex Systems into all possible network architectures. Because
your network may contain advanced features (such as a rewall or network domains),
consult a network administrator before connecting the QuantStudio
6 or 7 Flex
Systems to your laboratory network.
Networking overview
After installing the
QuantStudio
6 or 7 Flex System, you can connect the
QuantStudio
6 or 7 Flex System to a local area network to enhance its functionality.
This appendix describes how to:
Set up the QuantStudio
6 or 7 Flex System for use on a network.
Set up a computer for remote monitoring.
Test the network connection by engaging the remote monitoring feature.
When the QuantStudio
6 or 7 Flex Real-Time PCR System is connected to a network,
computers on the network that are running the QuantStudio
Real-Time PCR
Software can control or monitor it. The software can control up to 4 instruments and
monitor up to 10 instruments simultaneously. A networked system can be controlled
by only one computer at a time. A networked computer running the QuantStudio
Real-Time PCR Software can transfer experiments to and from an instrument, begin
or stop a run, and perform some maintenance functions. During a run, the Remote
Monitoring feature of the software can be used to view the run status, temperature,
and amplication data in real-time.
Note: Remote monitoring does not allow you to control the system.
C
Controlling and
monit
oring
networked
QuantStudio
6
and 7 Flex
Systems
QuantStudio
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
113

Table of Contents

Related product manuals