4.
Set the Internet Protocol (TCP/IP) Properties for either DHCP or Static IP
communication.
Network service Action
DHCP Tap Obtain an IP address automatically.
Static IP
1. Tap Use the following IP address.
2. Tap the IP Address field, enter the IP address using the
keypad, then tap Done.
3. Assign the:
• IP addresses for the DNS Servers (primary and
secondary)
• Subnet Mask setting
• Default Gateway setting
5.
T
ap
Save to sav
e the seings, then tap OK when prompted.
6.
Tap
to return to the main menu.
Y
ou can use the QuantStudio
™
6 or 7 Flex System touchscreen to map the shortcut
buons that appear in the Main Menu. You can congure shortcuts to automatically
open specic les and folders so that you can access data quickly and easily without
having to navigate to it.
1.
If the instrument is in standby, touch the QuantStudio
™
6 or 7 Flex System
touchscreen to activate it, then press
.
2.
In the Main Menu, congure the shortcuts as desired: T
o add a shortcut:
a.
Touch the shortcut of interest, then touch
Set Shortcut.
b.
T
ouch
From T
emplates to link to a specic template le or touch
From Folders to link to a folder
.
c.
Touch the desired template le or folder to congure the shortcut.
To delete a shortcut, touch the shortcut of interest, then touch
Remove
Shortcut, or touch Remove All to delete all shortcuts.
3.
When y
ou are nished conguring the shortcuts, touch
to return to the Main
Menu.
Y
ou can use the QuantStudio
™
6 or 7 Flex System touchscreen to view usage statistics
on the heated cover, lamp, and other instrument components.
1.
From the Main Menu of the instrument touchscreen, touch Tools, then touch
Show Statistics.
2.
When you are nished, touch
to return to the Main Menu.
Define the sys
tem
shortcuts
Review the
instrument
statistics
Appendix A Manual ins
trument operation
Administrate the instrument from the touchscreen
A
94
QuantStudio
™
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
To Next Page
Loading...
Need help?
General
