User's Manual 18 Document #: LTRT-42060
Mediant 2600 E-SBC
LTRT Description
EnableCoreDump; PrackMode; IgnoreAlertAfterEarlyMedia;
SessionExpiresDisconnectTime; BrokenConnectionEventTimeout;
TLSContexts_TLSVersion; TLSContexts_ServerCipherString;
TLSContexts_ClientCipherString; EnableWebAccessFromAllInterfaces;
ECNLPMode; SSHMaxLoginAttempts; ResetWebPassword;
IPOutboundManipulation_PrivacyRestrictionMode; CLIPrivPass; QOEPort
(removed); PrackMode (removed); DTMFVolume
New parameters: ProxySet_SuccessDetectionRetries;
ProxySet_SuccessDetectionInterval; ProxySet_FailureDetectionRetransmissions;
TLSContexts_DTLSVersion; TLSContexts_DHKeySize; EnableNonCallCdr;
QOEEnableTLS
41795
Updated sections: Configuring Firewall Settings
Updated parameters: AccessList_Source_IP; AccessList_Source_Port;
AccessList_Start_Port; AccessList_End_Port; ProxySet_EnableProxyKeepAlive;
ProxySet_IsProxyHotSwap; IpProfile_SBCPlayHeldTone;
PstnPrefix_SourceAddress; ResetWebPassword; KeepAliveTrapPort;
SSHMaxLoginAttempts; EnablePChargingVector (removed)
New parameters: CustomerSN
42060
Updated sections: Configuring NAT Translation per IP Interface; Silence
Suppression (removed); Comfort Noise Generation; SIP-based Media Recording
(France URL); DHCP-based Provisioning (note); Viewing Active Alarms (note)
Updated parameters: IpProfile_SCE (removed); IpProfile_SBCSDPPtimeAnswer
(Preferred Value); IpProfile_SBCPreferredPTime; SyslogOptimization (default):
IsCiscoSCEMode; EnableBusyOut; EnableSilenceCompression (removed);
UseDisplayNameAsSourceNumber
New parameters: IpProfile_SBCAdaptRFC2833BWToVoiceCoderBW;
ActiveAlarmTableMaxSize; NoAlarmForDisabledPort;
SBCRemoveSIPSFromNonSecuredTransport
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any
comments (suggestions or errors) regarding this document, please fill out the
Documentation Feedback form on our Web site at
https://online.audiocodes.com/documentation-feedback
.