AudioCodes Mediant 2600 - Page 626

User's Manual 626 Document #: LTRT-42060
Mediant 2600 E-SBC
Parameter Description
[\SBCAdmissionControl]
For a detailed description of this table, see ''Configuring Admission
Control'' on page 355.
Allowed Audio Coders Table
Web: Allowed Audio Coders
CLI: configure voip > sbc
allowed-coders-group
AllowedCodersGroup0
[AllowedCodersGroupX]
This table parameter defines Allowed Coders Groups, which
determine the audio (voice) coders that can be used for a specific
SIP entity.
The format of the ini file table parameter is as follows:
[AllowedCodersGroupX]
FORMAT AllowedCodersGroup_Index =
AllowedCodersGroup_Name;
[\AllowedCodersGroup]
Where X represents the index number.
For a detailed description of this table, see ''Configuring Allowed
Audio Coder Groups'' on page 359.
Allowed Video Coders Table
CLI: configure voip/sbc allowed-
video-coders-group group-X
[AllowedVideoCodersGroupX
]
This table parameter defines Allowed Video Coders Groups, which
determine the video coders that can be used for a specific SIP
entity.
The format of the ini file table parameter is as follows:
[AllowedVideoCodersGroup0]
FORMAT AllowedVideoCodersGroup_Index =
AllowedVideoCodersGroup_Name;
[\AllowedVideoCodersGroup]
Where X represents the index number.
For a detailed description of this table, see ''Configuring Allowed
Video Coder Groups'' on page 360.
Classification Table
Web: Classification Table
EMS: SBC Classification
CLI: configure voip > sbc
routing classification
[Classification]
This table parameter configures the Classification table. This table
classifies incoming SIP dialogs to Source IP Groups. The format of
the ini file table parameter is as follows:
[ Classification ]
FORMAT Classification_Index = Classification_ClassificationName,
Classification_MessageCondition, Classification_SrcSRDID,
Classification_SrcAddress, Classification_SrcPort,
Classification_SrcTransportType,
Classification_SrcUsernamePrefix, Classification_SrcHost,
Classification_DestUsernamePrefix, Classification_DestHost,
Classification_ActionType, Classification_SrcIPGroupID;
[ \Classification ]
For a detailed description of this table, see ''Configuring
Classification Rules'' on page 361.
Condition Table
Web: Condition Table
CLI: configure voip > sbc
routing condition-table
[ConditionTable]
This table parameter configures Message Condition rules for SIP
messages.
[ ConditionTable ]
FORMAT ConditionTable_Index = ConditionTable_Condition,
ConditionTable_Description;
[ \ConditionTable ]