Version 6.8 627 Mediant 2600 E-SBC
User's Manual 43. Configuration Parameters Reference
Parameter Description
For a detailed description of this table, see ''Configuring Message
Condition Rules'' on page 367.
SBC IP-to-IP Routing Table
Web: IP-to-IP Routing Table
EMS: IP to IP Routing
CLI: configure voip > sbc
routing ip2ip-routing
[IP2IPRouting]
This table parameter configures the SBC IP-to-IP Routing table for
routing incoming SIP messages such as INVITE messages to an IP
destination. The format of the ini file table parameter is as follows:
[ IP2IPRouting ]
FORMAT IP2IPRouting_Index = IP2IPRouting_RouteName,
IP2IPRouting_SrcIPGroupID, IP2IPRouting_SrcUsernamePrefix,
IP2IPRouting_SrcHost, IP2IPRouting_DestUsernamePrefix,
IP2IPRouting_DestHost, IP2IPRouting_RequestType,
IP2IPRouting_MessageCondition,
IP2IPRouting_ReRouteIPGroupID, IP2IPRouting_Trigger,
IP2IPRouting_CallSetupRulesSetId, IP2IPRouting_DestType,
IP2IPRouting_DestIPGroupID, IP2IPRouting_DestSRDID,
IP2IPRouting_DestAddress, IP2IPRouting_DestPort,
IP2IPRouting_DestTransportType, IP2IPRouting_AltRouteOptions,
IP2IPRouting_GroupPolicy, IP2IPRouting_CostGroup;
[ \IP2IPRouting ]
For a detailed description of this table, see ''Configuring SBC IP-to-
IP Routing Rules'' on page 368.
SBC Alternative Routing Reasons Table
Web: SBC Alternative Routing
Reasons
EMS: Alternative Routing
Reasons
CLI: configure voip > sbc
routing sbc-alternative-routing-
reasons
[SBCAlternativeRoutingReas
ons]
This table parameter configures the SBC Alternative Routing
Reasons table. The format of the ini file table parameter is as
follows:
[ SBCAlternativeRoutingReasons ]
FORMAT SBCAlternativeRoutingReasons_Index =
SBCAlternativeRoutingReasons_ReleaseCause;
[ \SBCAlternativeRoutingReasons ]
For a detailed description of this table, see ''Configuring SIP
Response Codes for Alternative Routing Reasons'' on page 378.
IP to IP Inbound Manipulation Table
Web: IP to IP Inbound
Manipulation
EMS: IP to IP Inbound
Manipulation
CLI: configure voip > sbc
manipulations ip-inbound-
manipulation
[IPInboundManipulation]
This table parameter configures the IP to IP Inbound Manipulation
table. This table allows you to manipulate the SIP URI user part
(source and/or destination) of the inbound SIP dialog message.
The format of the ini file table parameter is as follows:
[IPInboundManipulation]
FORMAT IPInboundManipulation_Index =
IPInboundManipulation_ManipulationName
IPInboundManipulation_IsAdditionalManipulation,
IPInboundManipulation_ManipulatedURI,
IPInboundManipulation_ManipulationPurpose,
IPInboundManipulation_SrcIPGroupID,
IPInboundManipulation_SrcUsernamePrefix,
IPInboundManipulation_SrcHost,
IPInboundManipulation_DestUsernamePrefix,
IPInboundManipulation_DestHost,
IPInboundManipulation_RequestType,
IPInboundManipulation_RemoveFromLeft,
IPInboundManipulation_RemoveFromRight,
IPInboundManipulation_LeaveFromRight,
To Next Page
Loading...
