AudioCodes Mediant 2600 - Page 634

User's Manual 634 Document #: LTRT-42060
Mediant 2600 E-SBC
Parameter Description
voip/ldap/enable
[LDAPServiceEnable]

[1] Enable
Note: For this parameter to take effect, a device reset is required.
CLI: search-dns-in-parallel
[LDAPSearchDNsinParalle
l]
Defines the method of how the device queries the DN object within
each LDAP server.
 [0] Sequential = (Default) The query is done in each DN object,
one by one, until a result is returned.
 [1] Parallel = The query is done in all DN objects at the same
time.
Web: LDAP Search Server
Method
CLI: ldap-search-server-
method
[LDAPSearchServerMetho
d]
Defines the method of how the device queries between two LDAP
severs.
 [0] Sequential = The device first queries one of the LDAP
servers, and if the DN object is not found, it queries the second
LDAP server.
 [1] Parallel = (Default) The device queries the LDAP servers at
the same time.
Web: LDAP Authentication
Filter
CLI: configure voip > ldap >
auth-filter
[LDAPAuthFilter]
Defines the LDAP search filter attribute for searching the login
username in the directory's subtree for LDAP-based user
authentication and authorization.
You can use the dollar ($) sign to represent the username. For
example, if this parameter is set to "(sAMAccountName=$)" and the
user logs in with the username "SueM", the LDAP query is run for
sAMAccountName=SueM.
Web: Use LDAP for
Web/Telnet Login
CLI: configure voip > ldap >
enable-mgmt-login
[MgmtLDAPLogin]
Enables LDAP-based management-user login authentication and
authorization.
 [0] Disable (default)
 [1] Enable
Note: For this parameter to take effect, a device reset is required.
[LDAPDebugMode]
Determines whether to enable the LDAP task debug messages.
This is used for providing debug information regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
Web: MS LDAP OCS
Number attribute name
EMS: LDAP ocs Number
Attribute Name
CLI: ldap-ocs-nm-attr
[MSLDAPOCSNumAttribut
eName]
Defines the name of the attribute that represents the user's Lync
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"msRTCSIP-PrimaryUserAddress".
Web: MS LDAP PBX
Number attribute name
CLI: ldap-pbx-nm-attr
[MSLDAPPBXNumAttribut
eName]
Defines the name of the attribute that represents the user PBX
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"telephoneNumber".
Web: MS LDAP MOBILE
Number attribute name
CLI: ldap-mobile-nm-attr
[MSLDAPMobileNumAttri
buteName]
Defines the name of the attribute that represents the user Mobile
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"mobile".