Version 5.8 403 October 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
Hook Flash Parameters
Web: Flash Keys Sequence Style
[FlashKeysSequenceStyle]
Hook flash keys sequence style.
[0] = Flash hook (default) - only the phone's Flash button is
used, according to the following scenarios:
1) During an existing call, if the user presses Flash, the call
is put on hold; a dial tone is heard and the user is able to
initiate a second call. Once the second call is established,
on-hooking transfers the first (held) call to the second call.
2) During an existing call, if a call comes in (call waiting),
pressing Flash places the active call on hold and answers
the waiting call; pressing Flash again toggles between these
two calls.
[1] = Flash hook + digit - a sequence of Flash + 1 holds a
call or toggles between two existing calls; Flash + 2 makes
a call transfer.
Web: Flash Keys Sequence
Timeout
[FlashKeysSequenceTimeout]
Flash keys sequence timeout - the time (in msec) the device
waits for digits after the user presses the Flash Hook button
(Flash Hook + Digit mode - when the parameter
FlashKeysSequenceStyle is set to 1).
The valid range is 100 to 5,000. The default is 2,000.
Keypad Feature - Call Forward Parameters
Web: Unconditional
EMS: Call Forward Unconditional
[KeyCFUnCond]
Keypad sequence that activates the immediate call forward
option.
Web: No Answer
EMS: Call Forward No Answer
[KeyCFNoAnswer]
Keypad sequence that activates the forward on no answer
option.
Web: On Busy
EMS: Call Forward Busy
[KeyCFBusy]
Keypad sequence that activates the forward on busy option.
Web: On Busy or No Answer
EMS: CF Busy Or No Answer
[KeyCFBusyOrNoAnswer]
Keypad sequence that activates the forward on 'busy or no
answer' option.
Web: Do Not Disturb
EMS: CF Do Not Disturb
[KeyCFDoNotDisturb]
Keypad sequence that activates the Do Not Disturb option
(immediately reject incoming calls).
To activate the required forward method from the telephone:
1. Dial the preconfigured sequence number on the keypad; a dial tone is heard.
2. Dial the telephone number to which the call is forwarded (terminate the number with #); a
confirmation tone is heard.
Web: Deactivate
EMS: Call Forward Deactivation
[KeyCFDeact]
Keypad sequence that deactivates any of the call forward
options. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Caller ID Restriction Parameters
Web: Activate
EMS: CLIR
[KeyCLIR]
Keypad sequence that activates the restricted Caller ID option.
After the sequence is pressed, a confirmation tone is heard.
To Next Page
Loading...
