AudioCodes mediapack MP-500 User Manual

Version 5.8 405 October 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
Keypad Feature - Reject Anonymous Call Parameters
Web: Activate
EMS: Reject Anonymous Call
[KeyRejectAnonymousCall]
Keypad sequence that activates the reject anonymous call
option, whereby the device rejects incoming anonymous calls.
After the sequence is pressed, a confirmation tone is heard.
Web: Deactivate
EMS: Reject Anonymous Call
Deact
[KeyRejectAnonymousCallDeact]
Keypad sequence that de-activates the reject anonymous call
option. After the sequence is pressed, a confirmation tone is
heard.
[RejectAnonymousCallPerPort]
This ini file table parameter determines whether the device
rejects incoming anonymous calls on FXS interfaces. The
format of this parameter is as follows:
[RejectAnonymousCallPerPort]
FORMAT RejectAnonymousCallPerPort_Index =
RejectAnonymousCallPerPort_Enable,
RejectAnonymousCallPerPort_Port,
RejectAnonymousCallPerPort_Module;
[\RejectAnonymousCallPerPort]
Where,
 Enable = accept [0] (default) or reject [1] incoming
anonymous calls.
 Port = Port number.
 Module = Module number.
For example:
[RejectAnonymousCallPerPort]
RejectAnonymousCallPerPort 0 = 0,1,1;
RejectAnonymousCallPerPort 1 = 1,2,1;
[\RejectAnonymousCallPerPort]
If enabled, when a device's FXS interface receives an
anonymous call, it responds with a 433 (Anonymity Disallowed)
SIP response.
Notes:
 This parameter is applicable only to FXS interfaces.
 This parameter is per FXS port.
 This parameter can appear up to 24 times.
 The double dollar ($$) symbol represents the default value.
 For an explanation on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' on page 273.

AudioCodes mediapack MP-500 Specifications

General

Brand	AudioCodes
Model	mediapack MP-500
Category	Gateway
Language	English