SIP User's Manual 412 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
received, the outgoing Source Number and Display Name are
set to '100' and the Presentation is set to Allowed (0).
When 'from: <sip:100@101.102.103.104>' is received, the
outgoing Source Number is set to '100' and the Presentation is
set to Restricted (1).
Web: Use Routing Table for Host
Names and Profiles
EMS: Use Routing Table For Host
Names
[AlwaysUseRouteTable]
Determines whether to use the device's Routing table to obtain
the URI host name and optionally, an IP profile (per call), even if
a Proxy server is used.
 [0] Disable = Don't use internal routing table (default).
 [1] Enable = Use the 'Tel to IP Routing' table .
Notes:
 This parameter appears only if the 'Use Default Proxy'
parameter is enabled.
 The domain name is used instead of a Proxy name or IP
address in the INVITE SIP URI.
Web/EMS: Tel to IP Routing
Mode
[RouteModeTel2IP]
For a description of this parameter, refer to ''Configuring the Tel
to IP Routing Table'' on page 201.
Web: Tel to IP Routing Table
EMS: SIP Routing > Tel to IP
[Prefix]
This ini file table parameter configures the 'Tel to IP Routing'
table for routing Tel-to-IP calls. The format of this parameter is
as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix,
PREFIX_ProfileId, PREFIX_MeteringCode,
PREFIX_DestPort, PREFIX_SrcIPGroupID,
PREFIX_DestHostPrefix, PREFIX_DestIPGroupID,
PREFIX_SrcHostPrefix, PREFIX_TransportType,
PREFIX_SrcTrunkGroupID;
[\PREFIX]
For example:
PREFIX 0 = *, quest, *, 0, 255, $$, -1, , 1, , -1, -1;
PREFIX 1 = 20, 10.33.37.77, *, 0, 255, $$, -1, , 2, , 0, -1;
PREFIX 2 = 30, 10.33.37.79, *, 1, 255, $$, -1, , -1, , 2, -1;
Notes:
 This parameter can include up to indices.
 For a detailed description of the table's parameters and for
configuring this table using the Web interface, refer to
''Configuring the Tel to IP Routing Table'' on page 201.
 For a description on using ini file table parameters, refer to
''Format of ini File Table Parameters'' on page 273.
To Next Page
Loading...
Need help?
General
