Chapter 6 Autel Enterprise App 119
Turn On/Off Visual Positioning
Tap “Safety”, and then tap the button to the right of "Visual Positioning" to turn on or off the
visual positioning function.
If the visual positioning function is turned on, the aircraft will hover in a place with a poor
GNSS signal.
Turning on visual positioning is a must to enter visual positioning mode. For more
information, see “3.8.1 Flight Status” in Chapter 3.
Turn On/Off Submit Flight Data to CAAC
Tap "Safety", and then tap the button to the right of "Submit Flight Data to CAAC" to turn on or
off the function of submitting flight data to CAAC.
Important
It is recommended to turn on the function of submitting flight data to CAAC. According to
Chinese laws and regulations, flight data must be submitted in real time to the official
system of the Civil Aviation Administration of China (CAAC) via the internet.
When the network is poor, the relevant flight data will be cached on your local device, and
the Autel Enterprise App will not store or forward the data to other services.
Enter Registration No.
Tap "Safety" and then tap "Registration No." to enter the real-name registration number of the
aircraft.
According to Chinese laws and regulations, real-name registration is required for aircraft.
For more information, see “2.1 Legal Use Notice” in Chapter 2.
Remote ID
Tap "Safety" and then tap "Remote ID". After entering the Remote ID, you can broadcast relevant
information about the aircraft for identification by nearby devices.
According to local laws and regulations, perform real-name registration for aircraft. For
more information, see “2.1 Legal Use Notice” in Chapter 2.
Emergency Stop Propellers During Flight
Tap "Safety" and then tap the drop-down list of "Emergency Stop Propellers During Flight" to
make relevant settings according to your needs.
To Next Page
Loading...
