Autel Alpha - Page 137

126 Chapter 6 Autel Enterprise App
 If the “Manual” mode is set, you can adjust the "Contrast" and "Brightness" by entering a
value or tapping the numbers on the left and right sides.
 Turn On/Off Radiometric Measurement
Tap the button to the right of "Radiometric Measurement" to turn on or off the radiometric
measurement function.
 If this function is turned on, you can set the image enhancement, isotherm, emissivity, and
temperature alarm.
 If this function is turned off, both "Radiometric Measurement Mode" and "FFC " cannot be
set.
1. Turn On/Off Image Enhancement
Tap the button to the right of "Image Enhancement" to turn on or off the image enhancement
function.
 If this function is turned on, you can enter a value in the edit box below or drag the slider
left or right to set the image enhancement value. The larger the value, the clearer the image
details.
2. Set Isotherm
Four isotherm statuses are available, that is, “Off”, “Human”, “Fire”, and “Custom”.
 If “Custom” is selected, you can set the minimum and maximum temperature of the
radiometric measurement range.
3. Set Emissivity
Enter a value in the edit box to the right of "Emissivity" or drag the slider below left or right to
adjust the emissivity value.
4. Turn On/Off Temperature Alarm
Tap the button to the right of "Temperature Alarm" to turn on or off the temperature alarm
function.
 You can set the minimum and maximum temperature for temperature alarms.
 Advanced Settings
On the “Camera Settings” interface, tap the " " icon to perform advanced settings for the
camera:
 Select Camera
Tap "Select Camera" to select the lens used for shooting from the list of lenses of the gimbal
camera. You can select one or more lenses.
 After a shooting lens is selected, when you tap the " " or " " icon, the selected lens will
simultaneously take photos or record videos. For unselected lenses, the shooting function
will be unavailable.
 Set Grid
Three grid styles are available, which can assist with picture composition during shooting. You
can select one or more grid styles.
 When multiple grid styles are selected, the grid styles will be superimposed and displayed
on all camera interfaces.
 Set Defog
Defogging can make the shooting or recording scene more transparent and enhance color
contrast and is used to eliminate the "fogging phenomenon" in the picture or the lack of picture
clarity caused by smog.
 Three defog intensities are available, that is, “Weak”, “Medium”, and “Strong”. The stronger
the defog intensity, the darker the image.
 Turn On/Off Stamps/Subtitles
Tap the button to the right of "Stamps/Subtitles" to turn on or off the stamps/subtitles function.