Chapter 6 Autel Enterprise App 145
Polygon Mission in Progress
Table 6-15 "Polygon Mission" Terms and Details
Relative Height
Refers to the vertical altitude of the work surface of the shot object
relative to the take-off point of the aircraft.
Ground Sampling Distance.
Finish Action
Refers to the action that the aircraft will perform after completing a
polygon mission.
Lost Action
Refers to the actions that the aircraft will perform when disconnected
from the remote controller for more than 4 seconds during flight.
Front Overlap
Refers to the image overlap rate between two consecutive photos taken
when capturing images along the flight heading.
Side Overlap
Refers to the image overlap rate between two consecutive photos taken
when capturing images along two adjacent flight routes.
Main Course Angle
Refers to the course angle between the main route and the latitude line
(horizontal line) when the flight routes are automatically generated.
Gimbal pitch
The observable range of the gimbal camera, that is, the angle from the
top to the bottom (-30° ~ 90°).
To Next Page
Loading...
