Autel Alpha - Page 75

64 Chapter 4 Remote Controller
3
Video Recording
Button
Press the button to start/end recording videos.
4 Key C1
Use the Autel Enterprise App to customize the key function. For
more information, see “6.5.3 RC Settings” in Chapter 6.
5 Air Outlet
For heat dissipation of the remote controller. When using it,
please pay attention to whether there are foreign objects
blocking the air outlet.
6 HDMI Interface
Outputs the live view of the remote controller to a supported
display device.
7
USB-C Interface
Used for remote controller charging or device debugging.
8 USB-A Interface
Connects to an expandable 4G/5G module or external USB
device for data transmission.
9 Power button
Long press for 3s to turn on/off the remote controller.
When the remote controller is on, quickly press the power
button to switch between Screen On and Screen Off.
10 Key C2
Use the Autel Enterprise App to customize the key function. For
more information, see “6.5.3 RC Settings” in Chapter 6.
11
Shooting Button
Press the button to take a photo.
12
Right Dial Wheel
Turn the dial wheel to adjust the zoom factor of the camera.
13 Right Stick
Controls the state of motion of the aircraft. The default stick
mode is Mode 2. In this mode, you can use the stick to control
the translation of the aircraft in four directions:
front/back/left/right. You can set the stick mode in the Autel
Enterprise App. For more information, see “6.5.3 RC Settings” in
Chapter 6.