8. Configurator, Projector adjustment settings
8.6 Image settings
Overview
The following image settings can be adjusted depending on the source type:
• Contrast
• Brightness
• Saturation
•Phase
• Sharpness
• Noise reduction
•Tint
When a setting is not adjustable, this setting is grayed out.
Image settings are done for the current active window only and must be repeated for
other windows.
Access to the Image properties
1. Select a window (input). (image 8-31)
2. Click on Adjust (a).
The Input dialog box opens (b).
136
R5976924 PROJECTOR TOOLSET 16/04/2009
To Next Page
Loading...