EN
5. Keep children, bystanders, and animals a minimum of 15 meters away from the work area.
Do not allow other people or animals to be near the tiller when starting or operating the
tiller.
6. While working with the tiller, always use approved protective safety clothing. Do not wear
clothes, scarves, ties or bracelets that may get stuck into undergrowth. Tie up and protect
long hair (for example with foulards, cap, helmets, etc.). Wear safety boots having skid-proof
sole and anti-piercing insert. Wear protective goggles or face screens. Take steps to
protect yourself against noise, for example, by using ear defenders or ear plugs. Wear
gloves that permit the maximum absorption of vibrations.
7. Only allow others to use this tiller who have read this Operator’s Manual or received
adequate instructions for the safe and proper use of this tiller.
8. Check the machine daily to ensure that all safety and other devices are perfectly functional.
9. Never use a damaged, modified, or improperly repaired or assembled tiller. Do not remove,
damage or deactivate any of the safety devices. Always replace cutting tools or safety
devices immediately if they become damaged, broken or are otherwise impaired.
10. Carefully plan your operation in advance. Do not start using machine until you have a clear
work area and a secure footing.
11. Only use the machine in well-ventilated places, do not use in explosive or flammable
atmospheres or in closed environments.
12. All interventions on the tiller, other those indicated in this manual, must be carried out by
qualified personnel.
13. The tiller is a product designed exclusively to break up clods and plow the soil (rotor blade
accessory), or cutting grass (cutter bar accessory). It is inadvisable to cut other types of
material. Any other usage not indicated in these instructions may damage the machine and
constitutes a serious risk to people and property.
14. Never leave the machine unattended with the engine running.
15. It is forbidden to hitch tools or applications that are not specified by the manufacturer.
16. Do not use the machine without the protective cover of the rotating blades.
17. Keep all danger and safety labels in perfect condition. If they become damaged or worn,
replace them immediately (see chapter 3 SAFETY SYMBOLS AND WARNINGS (Fig. 1)).
18. Do not use the machine for purposes other than those indicated in this manual (see chapter
12 Use).
19. It is the user’s responsibility to evaluate the potential risks that may arise in the area to be
worked on. It is also the user’s responsibility to take all the necessary precautions to ensure
his/her safety, particularly on slopes, uneven or slippery land and loose ground.
20. Make sure you have a firm foothold when working on slopes. Work across slopes, never
ascending or descending. Do not use the machine on land with a gradient of more than 10°
(17%).
21. Please note that the owner or the user is responsible for any accidents or damage to third
parties or their property.
22. When you engage the rotor blade assembly, make sure nobody is in front of or close to the
machine. Take a firm grip of the handlebars as they tend to lower when the rotor assembly
is engaged.
63
To Next Page
Loading...
