Bertolini 417 S - 3 SAFETY SYMBOLS AND WARNINGS ( 3)

EN
3 SAFETY SYMBOLS AND WARNINGS (FIG. 1)
1. Carefully read the instruction and maintenance manual before using this power tool.
2.
R
engage reverse gear
1
first forward speed
2
second forward speed
3
third forward speed
4
fourth forward speed
3. Clutch control.
4. Throttle control.
5. Brake control.
6. Differential locking.
7. Differential unlocking.
8. Power take-off engagement:
N
disengage power take-off
1
engage power take-off first speed
2
engage power take-off second speed
9. Forward direction configuration front tools.
10. Forward direction configuration rear tools.
11.
WARNING
Surfaces may be hot.
12. Machine brand and model.
13. Technical data.
14. Serial number.
15. CE conformity marking.
16. Type of machine: TILLER.
17. Year of manufacture.
18. Always keep hands and feet well away from the blade casing while the engine is running.
WARNING
The blades will continue moving for a few seconds even after the engine has
been shut off.
19. Carefully read this instruction and maintenance manual before using this machine.
20. Wear a protective helmet, goggles and earmuffs.
21.
66