Bobcat S850 - Page 63

61 S850 Operation & Maintenance Manual
STEERING DRIFT COMPENSATION (CONT’D)
Operation (Cont’d)
Figure 71
Press the Information button (Item 3) to cycle the data
d
isplay until the steering drift compensation menu is
displayed. The current steering drift compensation setting
will appear in the data display (Item 1) [Figure 71].
Press the left or right scroll button (Item 2) [Figure 71] on
the left panel to adjust the setting. Adjustments to
st
eering drift compensation are effective immediately and
saved automatically.
OR
Press the left or right button (Item 7) [Figure 71] on the
left control to adjust the setting. Adjustments to the
st
eering drift compensation are effective immediately and
saved automatically.
Press the left scroll button on the left panel or the left
b
utton on the left control to adjust the machine left.
[SFL01] (Item 4) through a maximum of [SFL10] will
appear in the data display (Item 1) [Figure 71]. The
number will increase by one
each time you press the
button. The higher the number, the greater the amount of
steering drift compensation to the left.
Press the right scroll button on the left panel or the right
b
utton on the left control to adjust the machine back
toward center. The display will decrease down to
NEUTRAL displayed as [SF---] (Item 5). Another press of
the upper right button will cause [SFR01] (Item 6) to
appear in the data display (Item 1) [Figure 71]. The
number will increase by one each time y
ou press the
button up to a maximum of [SFR10]. The higher the
number, the greater the amount of steering drift
compensation to the right.
Forward steering drift compensation setting can be
ad
justed with the steering controls in NEUTRAL or during
forward travel. Reverse steering drift compensation
setting can be adjusted during reverse travel. The letter
[R] will appear in place of the letter [F] in the data display
when setting reverse steering drift compensation.
(EXAMPLES: [SRL01], [SRR01], and [SR---].
Exiting The Steering Drift Compens
ation Menu:
Press the Information button (Item 3) [Figure 71] to exit
from the steering drift compensation adjustment menu.
OR
If no buttons are pressed for 10 seconds, the display
sc
reen will change to the hourmeter.
NA3267
1
3
2
Left Right
P107005D
7
P107006D
NA3227 / NA3229 / NA3231
5
6
4
63 of 210
Dealer Copy -- Not for Resale