Brother MFC-9340CDW - Page 287

3-124
Confidential
8.52 Develop Release Clutch
(1) Disconnect the wiring of the Registration clutch harness.
(2) Remove the Taptite cup S M3x8 SR screw. Release the three Hooks to remove the
Develop clutch gear cover from the Side frame L ASSY.
Fig. 3-174
(3) Remove the Develop release drive gear Z33 from the Side frame L ASSY.
Fig. 3-175
Taptite cup S M3x8 SR
Hook
Hook
Side frame L ASSY
Develop clutch
<Left side>
gear cover
drive gear Z33
<Left side>
Side frame L ASSY
Develop release
Develop release
gear Z34