Brother MFC-9340CDW - If You Replace the Fuser Unit;Pf Kit 1; Counter Reset after Fuser Unit;Pf Kit 1 Replacement (Function Code 88)

4-15
Confidential
8. IF YOU REPLACE THE FUSER UNIT/PF KIT 1
■ What to do when replacing the fuser unit/PF kit 1
- Reset the counter of the desired periodical replacement parts.
Periodical replacement parts whose counter can be reset. (Function code 88)
- Fuser unit
-PF Kit 1
8.1 Counter Reset after Fuser Unit/PF Kit 1 Replacement
(Function code 88)
Following "1.4.36 Counter reset after fuser unit/PF kit 1 replacement" in Chapter 5, reset the
counter of the desired periodical replacement parts.