Brother MFC-9340CDW - How to Recover from Errors of the Fuser Unit

5-72
Confidential
2.4 How to Recover from Errors of the Fuser Unit
How to recover from errors of the fuser unit is to use "1.4.37 Exit from the maintenance mode
(Function code 99)" in the maintenance mode.
WARNING
First of all, turn OFF the power of the machine to cool the fuser unit.
When clearing an error, be sure that the fuser unit is cooled down sufficiently. If an error is
cleared while the fuser unit is not cooled down, there is a possibility that the unit might be
unable to be repaired.