FI002K0018v1530hUK – THS/21 Instruction manual for installation, use and maintenance
2
DESCRIPTION
ORIGINAL INSTRUCTION 11
2.1.2 Integrated System on conveyor belt
With this version the CEIA THS Metal Detector is fully housed in a high-hygiene, stainless steel
structure fitted with a digital controller for controlling speed and the ejection stages for non-
conforming product.
CEIA inspections systems are available in a wide range of sizes suitable for a wide variety of
applications. The casing structure, the Metal Detector and the belt control panel are all made from
stainless steel.
The conveyor belt, the fully moulded cover for the ejection area and the reject product container are
all fully certified for food-safe applications.
2.1.3 Products that can be inspected
Parts of the Metal Detector and CEIA integrated systems which come in contact with product are
made from FDA certified materials, for full compatibility with food products.
The characteristics of the materials used can be provided by CEIA on request.
Products that can be inspected
- with dimensions and weight compatible with the useful opening of the Detection Probe and
the characteristics of the transport system;
- with chemical-physical characteristics compatible with the parts of the System that come in
contact with the product;
- with chemical-physical characteristics compatible with the metal detection performances
achievable by the System.
Products that can NOT be inspected
- all those which do not comply with even one of the points listed above.
To Next Page
Loading...
