FI002K0018v1530hUK – THS/21 Instruction manual for installation, use and maintenance
3
INSTALLATION
ORIGINAL INSTRUCTION 69
3.2.2.3 Packing list
The package contains:
- CEIA Integrated System comprising the conveyor belt, the Metal Detector Probe, the power
supply box and all options and accessories ordered
- Warnings Manual, Operator Manual and a sheet with an unique code to download all
Installation, Maintenance and Programming Manuals
- Quality Control Test Samples (if ordered)
3.2.2.4 Moving the Metal Detector
Before you move the detector, check its weight. It could be too heavy to be handled by one person. Use suitable handling
methods and tools. CEIA declines all liability for damages arising from incorrect handling of the container.
Use forklift trucks or sling the load-bearing structure. Ensure that the load is balanced during
movement. Avoid deforming the structure or its component parts.
If the system is fitted with castors, ensure that these are released before you start moving the device.
When transporting and handling the Metal Detector DO NOT pass slings, ropes, forklift forks, hands or any other lifting
equipment through the Probe aperture.
3.2.3 THS-RB
Store the system in its original packaging, or in a way that protects it adequately from atmospheric
agents or other possible causes of damage (moving objects, weights, solvents etc.).
3.2.3.1 Handling and moving the package device
Use a lift truck with a suitable load-bearing capacity. The
total weight of the package is marked on the package.
Packed integrated systems are bulky and
heavy. The centre of gravity of the
packaging is not where it might appear
from the outside of the packaging. To
ensure balanced lifting, insert the forks in
the positions marked on the packing.
Place the equipment, still in its package, as close as
possible to the final installation site.
To Next Page
Loading...
