FI002K0018v1530hUK – THS/21 Instruction manual for installation, use and maintenance
3
INSTALLAZIONE
ORIGINAL INSTRUCTION 127
3.9.9.3 Reversing belt (EM=R)
EM Typical product Throughput Ejector Type Ejection Notes
R
Light/small packed product
Low/medium
throughput
Reversing belt
Contaminated product
automatically ejected
Available only with
Bulk material
This mode cannot be used with the integrated systems: THS-MBB, THS-MBR or on all the other systems involving
inversion of the direction of travel.
Operation with automatic ejection of contaminated material, by reversing the belt direction.
Programming menu
Remote
parameter
Description Setting
Ejection > Ejection mode
EM
Inversion of the direction of travel to divert the
product into the removal area
R
Ejection > Ej. distance
ED
Distance travelled in reverse, following an
alarm. Set a distance needed for the removal of
the product from the conveyor belt.
0 - 6000 mm
Generic example
S: Metal Detector Probe
N: Conveyor belt
PL: Pack length
DW: Detector width
To Next Page
Loading...
