Ceia THS/21 - Page 19

FI002K0018v1530hUK – THS/21 Instruction manual for installation, use and maintenance
2
DESCRIPTION
ORIGINAL INSTRUCTION 19
Available features and options
THS-FBB Belt length (BL)
1000 1300 1500 1800
2000*
F Signalling lamp
- Belt type polyurethane (PU)
white
high contrast blue
M Stand type
adjustable feet (±75mm)
lockable castors (±50mm)
M Belt height extension (only with feet)
75 mm
125 mm
- Side panels for product containment
L Ejection system type
belt stop
reversing belt
reject pusher cylinder
reject air jet
bridge ejector (bidirectional upon request)
H Reject bin
standard size (400mm product input width)
large size (650mm product input width)
double bin (standard or large)
rollers with cover
double rollers with cover
P Output cover
standard (only ejection area)
Extended (until belt end)
with inspection door and Emergency sensor
E Synchronization photocell
retro-reflection
retro-reflection, laser
- Ejection confirmation photocell
retro-reflection
retro-reflection, barrier
- Additional Sensors kit
Bin full, Low air pressure
Electrick lock for Bin open/absent
Electrick lock with Emergency Stop function
- Encoder
- Ejection verification photocell
retro-reflection
retro-reflection, laser
- Shutters for sensors functional verification
Available only on some models of standard systems, without height extensions
Optional, only with bridge ejector
Only with Probe height DH

275
Only on models with ejection system
Only on models with additional sensors kit
Only on belt width BW

400

Standard

Optional accessory

Not available
* Only with THS/MN21 Probe
