Overview
2. When performing repairs, the safety strut must be placed under the vehicle body.
Check to ensure that the vehicle body does not slide onto safety support, making the
vehicle secure.
△
!
Warning
Do not push the jack onto suspension components (such as stabilizers, etc.) or
vehicle floor panels, as this can cause deformation.
If the vehicle is only being pushed against the front or rear end, ensure that the
wheels on the ground do not rotate to ensure safety.
When the vehicle is jacked up, it must be supported on a support. It is extremely
dangerous to do anything on a vehicle that is lifted by a jack.
To Next Page
Loading...