CENNTRO LOGISTAR 100 - Doors and Cargo Container Cover

To Next Page

To Previous Page

Exterior trims

3.2 Doors and cargo container cover

3.2.1 Rear door assembly (right)

Removal

Schematic diagram

Steps

1 - Door opening limiter; 2-Pin

1. Remove the limiter connecting pin by

gently tapping it upwards with a hammer.

1-Cloth; 2-Wood block

2. Using a jack, place a wood block

between the jack and the door panel to

support the door panel.

3. Unscrew the hinge mounting bolts to

remove the door assembly.