CENNTRO LOGISTAR 100 - Interior Trim; Power Drive

Interior trim
63
4. Interior trim
4.1 Interior trims
4.1.1 Roof liner
Removal
Schematic diagram
Steps
1 - Local lighting lamp; 2 - Sun visor assembly;
3 - Front passenger handle; 4-Double sided
adhesive tape
1. Remove the interior rearview mirror.
2. Remove the local lighting lamp.
3. Remove the sun visor assembly.
4. Remove the interior lamp and partition.
5. Remove the front passenger handle.
6. Remove the roof liner interior trim.
7. Remove the clips and remove the roof
liner.
Installation
Schematic diagram
Steps
1 - Mounting holes of spotlight; 2-Spotlight
conductor
1. Align the mounting holes.
△
! Caution
The above alignment is aligned in both
directions.
2. Install the front passenger handle and
clip.