CENNTRO LOGISTAR 100 - Side Trim Strip

To Next Page

To Previous Page

Exterior trims

3.6.3 Side trim strip

Schematic diagram

Removal steps

1 - Front door sealing strip; 2-Rear door sealing strip;

Shaded area: Double sided sealing strip

1. When the glass is fully raised,

remove the trims and sealing film.

2. Remove the door trim strip from

the back of the door by gripping each

clip with your fingers.

Installation steps

1. Install the door trim strip after

applying double-sided adhesive tape

at the locations indicated in the

removal figure.