CENNTRO LOGISTAR 100 - Front Door Glass

To Next Page

To Previous Page

Exterior trims

3.2.4 Front door glass

Removal

Schematic diagram

Steps

1. Remove the front door inner handle

assembly.

2. Remove the front door trim guard bolts.

3. Lower the door window glass

completely, and then remove the outer

sealing strip.

1 - Glass chute; 2-Front door front window

frame

4. Remove the front door trim guard and

disconnect the power window switch

harness connector.

5. Remove the front door sealing film.

6. Remove the window frame with the

glass chute.

1-Screw

7. Remove the glass mounting screws.

8. Remove the door glass.