CENNTRO LOGISTAR 100 - Symptom Table

Exterior trims
59
3.7.5 Symptom table
Fault symptom
Possible causes
Maintenance measures
The wiper fails or does not
return to the original
position
Wiper fuse is blown
Replace the blown fuse to
check for a short circuit
Wiper motor is faulty
Check the motor
Wiper control switch is
faulty
Check the switch
Conductor or grounding
fault
Repair
Cleaner failure
The cleaner hose or nozzle
is blocked
Repair
Cleaner motor is faulty
Check the motor
Wiper control switch is
faulty
Check the switch
Conductor fault
Repair