Cessna 182 1978 - Page 107

MODEL
182 &
T182
SERIES
SERVICE
MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL
182
& T182
OPERATION
NO. 4
MECHANIC INSPECTOR
REMARKS
30.
Hoses, Metal Lines,
and Fittings - Inspect for
signs
of
oil and fuel
leaks. Check
for abrasions,
chafing,
security, proper
routing and support
and for evi-
dence
of deterioration.
31. Cold and Hot Air
Hoses - Check condition,
routing,
and
security.
32.
Engine
Cylinders, Rocker
Box Covers,
and
Pushrod
Housings
-
Check for
fin damage,
cracks, oil
leak-
age, security
of attachment,
and
general
condition.
33. Cylinder Compression
- Perform differential
com-
pression test.
PROPELLER
1. Spinner - Check
general condition
and attachment.
2.
Spinner
and Spinner
Bulkhead
- Remove spinner,
wash, and
inspect
for cracks
and fractures.
3. Propeller
Blades
- Inspect
for cracks,
dents, nicks,
scratches,
erosion,
corrosion,
or other
damage.
4. Propeller
Anti-Ice
Slip Rings,
Brushes,
and Boots
-
Inspect
for condition
and
security.
Perform opera-
tional
check.
5. Propeller
Mounting
- Check
for security
of
installa-
tion.
6.
Propeller
Mounting
Bolts -
Inspect
mounting
bolts
and safety-wire
for
signs of
looseness.
Retorque
mounting
bolts
as required.
7. Propeller
Governor
and
Control
- Inspect
for oil
and
grease
leaks.
8.
Propeller
Governor
and
Control
- Check
for security
and
operation
of controls.
9. Propeller
Hub - Check
general condition.
Sheet
9 of 14
Revision
1
2-75