Cessna 182 1978 - Page 490

MODEL
182 & T182
SERIES
SERVICE
MANUAL
REPLACE DIAMETER
WITH
Fastener Collar
Fastener Collar
NAS178
NAS179 (See Note
1) NAS1054 NAS179,
NAS528
(See Note 1)
NAS14XX NAS1080C,
NAS1080E,
NAS1080G
(See Note 1) NAS529 NAS524A
(See
Notes 1 and
2) NAS1446
NAS1080C,
NAS1080A6
(See Note 1)
NAS7034
NAS1080K
(See
Note 1) NAS464
AN364, MS20364, MS21042
o NAS1103
NAS1303
o NAS6203
o
AN173
AN305,
MS20305,
MS21044,
MS21045
NAS1054 NAS179, NAS528 NAS14XX NAS1080C, NAS1080E
NAS529
NAS524A
(See
Note 2) NAS1446
NAS1080C, NAS1080A6
NAS7034
NAS1080K
NAS464
AN364, MS20304,
MS21042
o NAS1103
NAS1305
NAS6203
NAS14XX
NAS1080C
NAS529 NAS524A
NAS1080E
NAS1446
NAS1080C,
NAS1080A6
NAS1080G
NAS7034 NAS1080K
o NAS464
AN364,
MS20364,
MS21042
NAS1103
NAS1303
o NAS6203
NAS529
NAS524A
(See
Note 3)
NAS1446
NAS1080C,
NAS1080A6
NOTE 1:
See appropriate tables for
nominal diameters available.
NOTE 2: Available
in oversize for repair of elongated
holes. Ream holes to provide
a
.001 inch interference fit.
NOTE 3:
NAS1446 oversize only permitted
as a replacement for NAS529.
Steel shank fastener designed for drive-on collars.
Steel shank
fastener designed for squeeze-on collars.
Installation requires sufficient space
for
the tool and
extended
shank
of the fastener.
Threaded fastener.
18-6C