Cessna 182 1978 - Page 80

MODEL 182 & T182
SERIES SERVICE
MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL
182 & T182
OPERATION
NO.
1
Registration
No.
Airplane Model
and SN
Airplane
Time
INSPECTION
COMPLETED
BY
L
1 Propeller
Mounting
-
Check for
security
of installation.
L
2 Propeller Blades -
Inspect for cracks, dents,
nicks,
scratches, erosion.
corrosion. or other
damage.
L
3
Spinner
- Check
general
condition
and
attachment.
L
4 Spinner and Spinner
Bulkhead - Remove spinner,
wash.
and inspect for cracks and fractures.
L 5 Propeller
Mounting
Bolts - Inspect
mounting
bolts and
safety-wire
for
signs of looseness.
Retorque mounting
bolts as
required.
L
6
Propeller
Hub
-
Check
general
condition.
L 7
Propeller Governor
and Control
- Inspect for
oil and grease
leaks.
L
8 Propeller Anti-ice Slip
Rings. Brushes, and Boots -
Inspect
for condition, and security. Perform operational check.
M 2 Heater Components.
Inlets, and Outlets
- Inspect all lines.
connections, ducts,
clamps, seals. and gaskets
for
condition. restriction, and security.
M 4 Pitot Tube and
Stall Warning Vane - Check
for condition
and obstructions.
M 5 Pitot Tube
Heater Element - Perform
operational check.
N 3 Vacuum Pump
- Check for condition and security.
Check
vacuum
system breather line
for obstructions, condition,
and security.
O 4 Battery -
Check general condition and
security. Check
level of electrolyte.
O
5 Battery
Box and Cables
- Clean and
remove any
corrosion.
Check cables
for routing, support.
and security of
connections.
O
7 Alternator
Control
Unit
- Inspect
wiring, mounting,
condition.
and
wire
routing.
O
10 External
Power Receptacle
and Power
Cables - Inspect
for
condition and security.
Revision 3 2-47