Circutor CVM-B100 - Page 249

Figure 175: Analogue inputs conguration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
● When programming the scale:
0... 20 mA, to select the scale from 0 to 20 mA.
4... 20 mA, to select the scale from 4 to 20 mA.
Previous, selects the previous parameter.
Next, selects the next parameter.
Conrm, conrms and saves in the memory the values programmed on the screen.
Back, returns to the main conguration screen for analogue inputs, Figure 174.
Main Menu, back to the main menu, Figure 25.
● When programming the Zero and the Full-scale value:
Zero is the value for which you have the start of the analogue input, 0 or 4 mA.
The Full-scale is the value for which you have the end of the analogue input, 20 mA.
, ... the ten possible digits to program.
Negative, the minus sign.
Delete character, deletes the selected character.
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter.
Next, selects the next parameter.
249
Instruction Manual
CVM-B100 - CVM-B150