Circutor CVM-B100 - Page 300

7.9.4.1.- Conguration of DHCP activation/deactivation
On this screen you select whether or not the IP is automatically assigned. Figure 210.
Figure 210: Conguration screen of the Datalogger module (TCP Auto)
The following options appear in the lower area:
DHCP activation, the IP is automatically assigned.
DHCP deactivation, the TCP parameters are congured manually in option .
Confirm, confirms and saves in the memory the values programmed on the
screen
.
Back, returns to the main conguration screen of the Datalogger module, Figure 209.
Main Menu, returns to the main menu, Figure 25.
300
CVM-B100 - CVM-B150
Instruction Manual