Cisco A9K-SIP-700 Command Reference

policy-map type pbr
To create or modify a policy map of type policy based routing that can be attached to one or more interfaces,
use the policy-map type pbr command in Global Configuration mode. To disable this feature, use the no
form of this command.
policy-map type pbr name
no policy-map type pbr name
Syntax Description
Represents the policy map name.
policy-map name
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeqos
Examples
This is an example of configuring the policy-map type pbr command in the Global Configuration mode:
RP/0/RSP0/CPU0:router(config)# policy-map type pbr pbr_policy
RP/0/RSP0/CPU0:router(config-pmap)# end-policy-map
Related Commands
DescriptionCommand
Enables the class-map.class-map type control subscriber, on page 120
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
131
Control Policy Commands
policy-map type pbr

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English